Data Enabler Pro Release Notes ------------------------------ Version 34 20-September-2017 ================================ DEFECTS RESOLVED ---------------- None NEW FEATURES ------------ 1) Added ability to enable/disable data output using 32-bit output filter bitmaps to improve configuration flexibility and minimize output data conflicts. 2) Added light data packet padding to CKDMX if input light data is less than 24 bytes. 3) Removed the filter that only allowed DMX light data packets of at least 24 bytes but still filter out DMX light data packets of less than 2 bytes. KNOWN DEFECTS None Version 30 09-August-2016 ================================ DEFECTS RESOLVED ---------------- 1) Resolved the issue where DE Pro is not discoverable when receiving broadcast data. 2) Resolved the rogue broadcast packet issue when DMX input enabled: broadcast to CKDMX port if the DMX input data length is greater than or equal to 3 bytes, and only broadcast light data totalling 25 bytes or longer to the KiNET port. NEW FEATURES ------------ 1) Ethernet PHY automatically reinitialized if it has reset. 2) Added ability to modify CKDMX break time, mark-after-break time, and interslot time. 3) Added ability to respond to pings. 4) Added "quick-boot" feature in bootloader and mainline. 5) Added discovery delay, which is now enabled by default. 6) Added support for reading external EEPROM values from fixtures. 7) Added 20 millisecond delay after blinkscan routine so we do not have fixtures yanking the data line while we send data. 8) Changed 10 second relay lower limit to 1 second. 9) Added 16-bit token support. 10) Updated discover string to Philips Color Kinetics. KNOWN DEFECTS None Version 16 05-July-2012 ================================ DEFECTS RESOLVED ---------------- 1) None NEW FEATURES ------------ 1) Settings are not written to flash if the new settings value is the same as the previous value. KNOWN DEFECTS None Version 15 04-June-2012 ================================ DEFECTS RESOLVED ---------------- 1) Fixed bug where some fixtures' serial numbers were difficult to find by searching using a DMX source. NEW FEATURES ------------ 1) Added priority mechanism for KiNET V1 packets. KNOWN DEFECTS None Version 14 08-May-2012 ================================ DEFECTS RESOLVED ---------------- 1) None NEW FEATURES ------------ 1) Added priority mechanism for KiNET V2 packets. KNOWN DEFECTS None Version 13 18-April-2012 ================================ DEFECTS RESOLVED ---------------- 1) Fixed bug with incoming DMX packets getting dropped. NEW FEATURES ------------ KNOWN DEFECTS ------------- Version 12 01-December-2011 ================================ DEFECTS RESOLVED ---------------- NEW FEATURES ------------ 1) Implemented method to enable/disable DMX packet processing through a KiNET Get/Set packet. KNOWN DEFECTS ------------- Version 11 22-June-2011 ============================ DEFECTS RESOLVED ---------------- None. NEW FEATURES ------------ 1) Implemented workaround to properly read serial number or EE data when many CKDMX fixtures are attached. KNOWN DEFECTS ------------- None.